All Courses
All Courses
Courses by Software
Courses by Semester
Courses by Domain
Tool-focused Courses
Machine learning
POPULAR COURSES
Success Stories
AIM: (1)TO CREATE A COLUMN SCHEDULE AS SHOWN IN THE FIGURE WITH THE HELP OF LINES.ALSO BY INSERTING TEXT WITH THE HELP OF DTEXT COMMAND OR SINGLE LINE TEXT. (2)TO USE FONT "roman.shx" WITH HEIGHT OF 8" AND JUSTIFY TEXT "LEFT" FORM THE COMMAND. PROCEDURE: (1)TO CREATE COLUMN SCHEDULE AS SHOWN IN THE FIGURE. INTRODUCTION:…
Samiksha dhole
updated on 18 Jul 2022
AIM:
(1)TO CREATE A COLUMN SCHEDULE AS SHOWN IN THE FIGURE WITH THE HELP OF LINES.ALSO BY INSERTING TEXT WITH THE HELP OF DTEXT COMMAND OR SINGLE LINE TEXT.
(2)TO USE FONT "roman.shx" WITH HEIGHT OF 8" AND JUSTIFY TEXT "LEFT" FORM THE COMMAND.
PROCEDURE:
(1)TO CREATE COLUMN SCHEDULE AS SHOWN IN THE FIGURE.
INTRODUCTION:
1.Column C1 should be provided with size of 9"x24" with mix of M25 grade with main reinforcement of 20 diameter in 4 nos and 12 diameter in 6 nos and stirups of diameter 8@3"& 8" CRS of (1 set of 3 strps).
2.Column C1a should be provided with size of 9"x24" with mix of M25 grade with main reinforcement of 16 diameter in 12 nos and stirups of diameter 8@3"& 8" CRS of (1 set of 3 strps).
3.Column C2 should be provided with size of 9"x24" with mix of M25 grade with main reinforcement of 20 diameter in 8 nos and 12 diameter in 4 nos and stirups of diameter 8@3"& 8" CRS of (1 set of 3 strps).
4.Column C2a should be provided with size of 9"x10" with mix of M25 grade with main reinforcement of 16 diameter in 8 nos and stirups of diameter 8@3"& 8" CRS of (1 set of 2 strps).
5.Column C3 should be provided with size of 9"x21" with mix of M25 grade with main reinforcement of 16 diameter in 12 nos and stirups of diameter 8@3"& 8" CRS of (1 set of 3 strps).
STEP TO FOLLOWS:
1.Draw the table using line command.
2.Using DTEXT command specify the text origin point>rotation 0>enter the given text.
3.Text should be justify Left form the command bar.
4.Using ST command specify the font "romans.shx">specify height 8".
5.After completing with the given text draw all the given columns with each detail specification.
RESULTS:
Hence the column schedule table is completed with proper text,diameter,length,width,bars,stirups.
(2)TO CREATE WINDOW SCHEDULE AS SHOWN IN THE FIGURE.
INTRODUCTION:
The table contain window width, sill, lintels, their nos and respective location of the window.
STEP TO FOLLOWS:
1.Draw the table using line command.
2.Using DTEXT command specify the text origin point>rotation 0>enter the given text.
3.Text should be justify Left form the command bar.
4.Using ST command specify the font "romans.shx">specify height 5".
5.Complete the following table by text using given details.
RESULT:
The following table is completed using all the details.
3. Create the drawing template as shown in the figure.
INTRODUCTION:
Creating template by using table and multitext.
STEP TO FOLLOWS:
1.Draw the table using line command.
2.Using DTEXT command specify the text origin point>rotation 0>enter the given text.
3.Text should be justify Left form the command bar.
4.Using ST command specify the font "romans.shx">specify height 7".
5.Using multitext type all the given text and complete the first column text.
6.Complete rest of the table using text command.
RESULT:
4. Create the list of drawing schedule as shown in the figure.
INTRODUCTION:
Using table command the project details are being listed by the list of architectural drawing with nos,drawing no,description.
STEP TO FOLLOWS:
1.Draw the table using table command.
2.Enter the number of row and columns,set the cell styles and insert the table.
3.Selecting the arrow extend the box.
4.After extending box and draw the horizontal line.
5.Using DTEXT command specify the text origin point>rotation 0>enter the given text.
6.Text should be justify Left form the command bar.
7.Using ST command specify the font "romans.shx">specify height 1.
8.Enter the text using text command.
9.Make the contents of title and header rows.
10.Give required justification to the cells and adjust the cell size if required.
RESULT:
5. Create the Beam detail as shown in the figure and provide text wherever given.
STEP TO FOLLOWS:
1.Draw two parallel lines.
2.Using the breakline command,draw breaklines at top and bottom.
3.At certain height draw the top level of 9" and ground level of 3".
4.By using the hatch command,show the brick wall and concrete work.
5.Give the dimensions by using command dim.
6.Draw the arrows and line to specify the different levels.
7.Using text command,give text wherever necessary.
RESULT:
RESULT: The Column, window schedule, templates, beam all are created by proper commands like line, tables, text, multitext, style text, hatch, breakline, etc.
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
To Generate report for Steel Industrial and RC structures using TSD
AIM:- to generate the report for the steel building design Procedure:- Open the Tekla model Now go to report option from the ribbon and select model report Now select the load cases and combinations summary to obtain report Click on the show report to obtain report We can change the project name , address…
30 Dec 2022 11:47 AM IST
To Design slab and foundation for an RC residential building using TSD
1.Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab and foundations) Aim - To design the slab and foundation of the model. Tools Used - 1st Order analysis, Analysis all ( static ), Status , check panel ,Properties window etc. Procedure - Open the…
30 Dec 2022 11:35 AM IST
To Design RC column and beam for RC residential structure using TSD
Aim:- To run the analysis of the structure and design reinforced concrete beam and column procedure:- open the tekla model and run the analysis now select any of the column member and right click on it then select the interactive design from the given option check whether the member is passing through all the design…
30 Dec 2022 11:19 AM IST
To Generate seismic loading based on IS code and to run the analysis using TSD
1.Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly Aim: To generate seismic loading based IS codal provisions and zone II. Procedure: Open the previously save Tekla model Now go to the load cases and add the seismic load case, and click ok Now go…
21 Dec 2022 08:25 AM IST
Related Courses
0 Hours of Content
Skill-Lync offers industry relevant advanced engineering courses for engineering students by partnering with industry experts.
© 2025 Skill-Lync Inc. All Rights Reserved.