All Courses
All Courses
Courses by Software
Courses by Semester
Courses by Domain
Tool-focused Courses
Machine learning
POPULAR COURSES
Success Stories
1. Setup model for RC building design and based on following parameters for cover MEMBERS IN CONTACT WITH GROUND ABOVE GROUND Column 50mm 40mm Beam 30mm 25mm Slab 30mm 25mm Pilecap 75mm Foundation 50mm AIM : To Setup model for RC building design and based on following…
Samiksha dhole
updated on 21 Dec 2022
1. Setup model for RC building design and based on following parameters for cover
MEMBERS |
IN CONTACT WITH GROUND |
ABOVE GROUND |
Column |
50mm |
40mm |
Beam |
30mm |
25mm |
Slab |
30mm |
25mm |
Pilecap |
75mm |
|
Foundation |
50mm |
|
AIM :
To Setup model for RC building design and based on following parameters for cover
INTRODUCTION :
R.C.C. Structure design :a combination of concrete and steel reinforcement that are joined into one piece and work together in a structure. The term “reinforced concrete” is frequently used as a collective name for reinforced-concrete structural members and products.Reinforced concrete (RC) frame structures are built from concrete that contains steel bars, called reinforcement bars, or rebar. This combination works very well, as concrete is very strong in compression, easy to produce at site, and inexpensive and steel is very strong in tension.
PROCEDURE :
RESULT :
As per the question Setup model for RC building design and based on following parameters for cover has been doned
2. Model grids as per the attachment 2,2.1 and 2.2
AIM :
To Model grids as per the given attachment 2,2.1 and 2.2
INTRODUCTION :
Each square is 1 square inch. To draw this grid, put your ruler at the top of the paper, and make a small mark at every inch. Place the ruler at the bottom of the paper and do the same thing. Then use the ruler to make a straight line connecting each dot at the bottom with its partner at the top.
PROCEDURE :
RESULT :
As per the question Model grids sucessfully arranged by using given attachment 2,2.1 and 2.2
3. Study the layout and write a summary for general arrangement of the structure
AIM :
To Study the layout and write a summary for general arrangement of the structure
INTRODUCTION :
The general arrangement (GA) or structural layout is a document that clearly specifies the disposition of the structural elements in a building such as the columns, beams, panelling of the floor slabs etc, on which the design of the structure is based.A GA Drawing stands for General Arrangement Drawing; it is used to communicate the important overall relationship between the main elements of the tank and key dimensions. This drawing acts as a gateway between the designer, in this case, Fuelchief and the customer
PROCEDURE :
RESULT :
As per the question Study the layout and write a summary for general arrangement of the structure has been completed
4. Model RC columns, beams and slabs as per your general arrangement
AIM :
To Model RC columns, beams and slabs as per your general arrangement
INTRODUCTION :
PROCEDURE :
STEP :1
STEP :2
STEP :3
RESULT :
As per the question Model RC columns, beams and slabs are arranged sucessfully
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
To Generate report for Steel Industrial and RC structures using TSD
AIM:- to generate the report for the steel building design Procedure:- Open the Tekla model Now go to report option from the ribbon and select model report Now select the load cases and combinations summary to obtain report Click on the show report to obtain report We can change the project name , address…
30 Dec 2022 11:47 AM IST
To Design slab and foundation for an RC residential building using TSD
1.Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab and foundations) Aim - To design the slab and foundation of the model. Tools Used - 1st Order analysis, Analysis all ( static ), Status , check panel ,Properties window etc. Procedure - Open the…
30 Dec 2022 11:35 AM IST
To Design RC column and beam for RC residential structure using TSD
Aim:- To run the analysis of the structure and design reinforced concrete beam and column procedure:- open the tekla model and run the analysis now select any of the column member and right click on it then select the interactive design from the given option check whether the member is passing through all the design…
30 Dec 2022 11:19 AM IST
To Generate seismic loading based on IS code and to run the analysis using TSD
1.Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly Aim: To generate seismic loading based IS codal provisions and zone II. Procedure: Open the previously save Tekla model Now go to the load cases and add the seismic load case, and click ok Now go…
21 Dec 2022 08:25 AM IST
Related Courses
0 Hours of Content
Skill-Lync offers industry relevant advanced engineering courses for engineering students by partnering with industry experts.
© 2025 Skill-Lync Inc. All Rights Reserved.