All Courses
All Courses
Courses by Software
Courses by Semester
Courses by Domain
Tool-focused Courses
Machine learning
POPULAR COURSES
Success Stories
1)Generate manual wind loading in the design report based IS code as per the following input Basic wind speed = 39m/s Terrain category 2 Aim - Generate manual wind loading in the design report based IS code as per the following input Basic wind speed = 39 m/s Terrain category = 2 Procedure - First calculate load combination …
Samiksha dhole
updated on 03 Dec 2022
1)Generate manual wind loading in the design report based IS code as per the following input
Aim - Generate manual wind loading in the design report based IS code as per the following input
Basic wind speed = 39 m/s
Terrain category = 2
Procedure -
First calculate load combination
Result - Calculations are done for the wall panel
2)Based on the above calculation apply the loadings on the model
Aim - Based on the above calculation apply the loading on the model
Procedure -
Result -
3)On a separate model generate wind loading using wind wizard
Aim - On a separate model generate wind loading using wind wizard
Procedure -
Result -
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
To Generate report for Steel Industrial and RC structures using TSD
AIM:- to generate the report for the steel building design Procedure:- Open the Tekla model Now go to report option from the ribbon and select model report Now select the load cases and combinations summary to obtain report Click on the show report to obtain report We can change the project name , address…
30 Dec 2022 11:47 AM IST
To Design slab and foundation for an RC residential building using TSD
1.Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab and foundations) Aim - To design the slab and foundation of the model. Tools Used - 1st Order analysis, Analysis all ( static ), Status , check panel ,Properties window etc. Procedure - Open the…
30 Dec 2022 11:35 AM IST
To Design RC column and beam for RC residential structure using TSD
Aim:- To run the analysis of the structure and design reinforced concrete beam and column procedure:- open the tekla model and run the analysis now select any of the column member and right click on it then select the interactive design from the given option check whether the member is passing through all the design…
30 Dec 2022 11:19 AM IST
To Generate seismic loading based on IS code and to run the analysis using TSD
1.Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly Aim: To generate seismic loading based IS codal provisions and zone II. Procedure: Open the previously save Tekla model Now go to the load cases and add the seismic load case, and click ok Now go…
21 Dec 2022 08:25 AM IST
Related Courses
0 Hours of Content
Skill-Lync offers industry relevant advanced engineering courses for engineering students by partnering with industry experts.
© 2025 Skill-Lync Inc. All Rights Reserved.