All Courses
All Courses
Courses by Software
Courses by Semester
Courses by Domain
Tool-focused Courses
Machine learning
POPULAR COURSES
Success Stories
1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. AIM:Need to create sinusoidal point then curve from the point and then create surface INTRODUCTION: By using dynamo created a sinusoidal point then created a curve from the point and converted into the surface PROCEDURE:…
Samiksha dhole
updated on 11 Nov 2022
1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve.
AIM:Need to create sinusoidal point then curve from the point and then create surface
INTRODUCTION:
By using dynamo created a sinusoidal point then created a curve from the point and converted into the surface
PROCEDURE:
STEP 1) OPEN DYNAMO
STEP 2) CREATE NEW FILE IN DYNAMO
STEP 3) CREATE SINUSOIDAL POINT
STEP 4) CREATE CURVE
STEP 5) CREATE CUSTOM NODE
STEP 6) CREATE SURFACE
RESULT: After following above steps, we get the result of sinusoidal surface in Revit as shown below
2) Create a conceptual layout of floor plan in dynamo . Using the tools available in dynamo link the lines to appropriate model elements in Revit by choosing the wall types and wall parameters. Make use of the sliders to slide through the height of the wall and length of the wall.
AIM:By using dynamo created conceptual wall layout of floor plan
INTRODUCTION:
To create the conceptual layout of a floor plan in dynamo, used available tool for joining the line, wall type and floor type and used sliders for height and length of wall
PROCEDURE:
STEP 1) OPEN DYNAMO
STEP 2) CREATE POINT
STEP 3) CREATE LINE
STEP 4) PROVIDE LEVEL, WALL TYPE AND HIGHT OF THE WALL
STEP 5) PROVIDE FLOOR TYPE
RESULT:
After following above steps, obtain the result in Revit as shown below with appropriate wall length, width, height and materials
3) Create an array of model elements in Revit. Use dynamo to vary the properties of model elements by using the slider or code block
AIM:Need to create an array of elements in Revit and vary the properties by using slider or code block in dynamo
INTRODUCTION:
Created the array of columns in Revit and by using the integer slider from dynamo, rotate the column in Revit
PROCEDURE:
STEP 1) OPEN REVIT AND CREATE ARRAY OF COLUMN
STEP 2) OPEN DYNAMO
STEP 3) CREATE ROTATION IN DYNAMO
Result:
After following above steps, obtain the result as shown below, column as been rotated by 45 degree
4) Create a conceptual mass in Revit and develop a parametric column by dividing the surfaces and apply the concepts similar to use in parametric walkway modelling. Use triangular bent or square shaped panels to add finish to the parametric column
AIM:Create the Conceptual Mass in Revit, create a form and use property of triangular bent icon in the parametric column
INTRODUCTION:
Created a Conceptual Mass and developed a parametric column by dividing the surface and finish the model by using triangular bent shape
PROCEDURE:
STEP 1) OPEN CONCEPTUAL MASS
STEP 2) CREATE SPLINE COLUMN LINE
STEP 3) CONVERT INTO PARAMETRIC SOLID FORM
STEP 4) CONVERT SOLID FORM TO TRIANGULAR BENT
RESULT:
After following above steps, got the below shown result Conceptual Mass of parametric column and finished the model by using triangular bent shape
5) Use Dynamo to work on developing a Parametric Stadium. List your parameters and use the visual programming approach to complete the modelling, You can use the concepts discussed in parametric high rise tower in class for reference.
AIM:By using dynamo created conceptual wall layout of floor plan
INTRODUCTION:
To create the conceptual layout of a floor plan in dynamo, used available tool for joining the line, wall type and floor type and used sliders for height and length of wall
PROCEDURE:
STEP 1) OPEN DYNAMO
STEP 2) PROVIDE HEIGHT AND LEVELS
STEP 3) PROVIDE HEIGHT AND LEVELS
STEP 4) PROVIDE HEIGHT AND LEVELS
STEP 5) ROTATE THE LEVELS
STEP 6) CREATE SURFACE
RESULT:
After following above steps, got the result as shown below
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
To Generate report for Steel Industrial and RC structures using TSD
AIM:- to generate the report for the steel building design Procedure:- Open the Tekla model Now go to report option from the ribbon and select model report Now select the load cases and combinations summary to obtain report Click on the show report to obtain report We can change the project name , address…
30 Dec 2022 11:47 AM IST
To Design slab and foundation for an RC residential building using TSD
1.Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab and foundations) Aim - To design the slab and foundation of the model. Tools Used - 1st Order analysis, Analysis all ( static ), Status , check panel ,Properties window etc. Procedure - Open the…
30 Dec 2022 11:35 AM IST
To Design RC column and beam for RC residential structure using TSD
Aim:- To run the analysis of the structure and design reinforced concrete beam and column procedure:- open the tekla model and run the analysis now select any of the column member and right click on it then select the interactive design from the given option check whether the member is passing through all the design…
30 Dec 2022 11:19 AM IST
To Generate seismic loading based on IS code and to run the analysis using TSD
1.Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly Aim: To generate seismic loading based IS codal provisions and zone II. Procedure: Open the previously save Tekla model Now go to the load cases and add the seismic load case, and click ok Now go…
21 Dec 2022 08:25 AM IST
Related Courses
Skill-Lync offers industry relevant advanced engineering courses for engineering students by partnering with industry experts.
© 2025 Skill-Lync Inc. All Rights Reserved.