All Courses
All Courses
Courses by Software
Courses by Semester
Courses by Domain
Tool-focused Courses
Machine learning
POPULAR COURSES
Success Stories
1)Summarize the user interface in TSD with the for the following items: - Project Workspace – How to access and usage Scene Content – Demonstrate the use of scene content Create two scene views Loading drop list- How to access Properties windows – how to access and…
Samiksha dhole
updated on 22 Nov 2022
1)Summarize the user interface in TSD with the for the following items: -
Project Workspace – How to access and usage
Scene Content – Demonstrate the use of scene content
Create two scene views
Loading drop list- How to access
Properties windows – how to access and usage
Aim - To summarize the user interface in TSD for the following items
Project Workspace -
Scene Content -
Two scene view -
Loading drop list -
Properties windows -
2)Create a new file in TSD and set up the settings for a steel building to have member grade FE410 and concrete grade of M30 as per IS codes. The covers for the members to be as per the following input: -
MEMBERS |
IN CONTACT WITH GROUND |
ABOVE GROUND |
Column |
50mm |
40mm |
Slab |
30mm |
25mm |
Pile cap |
75mm |
|
Foundation |
50mm |
Aim - To create a new file in TSD and set up the settings for a steel building to have member grade Fe410 and concrete grade of M30 as per IS codes and also provide covers too the members
Procedure -
3)With reference to the input drawing as per Attachment 1, 1.1, and 1.2 and study the steel building plan and summarize your understanding of the plan. Based on your study assume and explain the location of columns and beam and develop a hand sketch for each plan.
AIM: With reference to the input drawing given, study the steel building plan and to summarize our understanding of the plan. Based on our study assume and explain the location of columns and beam and to develop a hand sketch for each plan
INTRODUCTION:
The first step of any structural planning is to study the architectural drawing given and to check the various properties like geometry, symmetry, stiffness, redundancy etc. After this assigning the column and beams are done before planning for foundation or any other components.
Columns are to be placed at:
Columns should not be placed at places having door(openings) or at places that takes away the beauty pf the building or at areas having less spaces.
GROUND FLOOR PLAN
FIRST FLOOR PLAN:
ELEVATION:
4)Model grid lines and construction levels as per Attachment 1. 1.1 and 1.2. All dimensions are in mm
AIM: To Model grid lines and construction levels as per the given Attachment. The base level to be 500mm below ground level.
PROCEDURE:
Initially open the Tekla Structural Designer software and the software will open as follows.
Now click on New option to create a new model workspace.
The project workspace is now active as shown and all the Ribbons and menu bars are visible now.
In the Model toolbar select Construction levels icon to open the construction levels dialogue box.
The construction level dialogue box appears and name each level like base, GF, 1st floor and Roof and heights was assigned to each level as shown
Now using the grid line and quick parallel grid line option the horizontal and verticals grids was drawn as per the given dimensions in the attachments.
RESULTS:
The construction levels and grid lines were drawn corresponding to the given attachment.
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
To Generate report for Steel Industrial and RC structures using TSD
AIM:- to generate the report for the steel building design Procedure:- Open the Tekla model Now go to report option from the ribbon and select model report Now select the load cases and combinations summary to obtain report Click on the show report to obtain report We can change the project name , address…
30 Dec 2022 11:47 AM IST
To Design slab and foundation for an RC residential building using TSD
1.Design the slab and foundation of the model. Outline the thought process for designing of the elements (column, beam, slab and foundations) Aim - To design the slab and foundation of the model. Tools Used - 1st Order analysis, Analysis all ( static ), Status , check panel ,Properties window etc. Procedure - Open the…
30 Dec 2022 11:35 AM IST
To Design RC column and beam for RC residential structure using TSD
Aim:- To run the analysis of the structure and design reinforced concrete beam and column procedure:- open the tekla model and run the analysis now select any of the column member and right click on it then select the interactive design from the given option check whether the member is passing through all the design…
30 Dec 2022 11:19 AM IST
To Generate seismic loading based on IS code and to run the analysis using TSD
1.Generate seismic loading based IS codal provisions and zone II. Any other data you can assume and input accordingly Aim: To generate seismic loading based IS codal provisions and zone II. Procedure: Open the previously save Tekla model Now go to the load cases and add the seismic load case, and click ok Now go…
21 Dec 2022 08:25 AM IST
Related Courses
Skill-Lync offers industry relevant advanced engineering courses for engineering students by partnering with industry experts.
© 2025 Skill-Lync Inc. All Rights Reserved.