PROJECT ON CONCRETE MIX DESIGN Aim-       To calculate concrete mix design for M35 grade concrete with fly ash and M50 grade concrete without fly ash.   Introduction-      Concrete Mix Design means determination of the proportion of the concrete ingredients i.e. Cement,…

    Aim- To plan a G+1 residential building according to vaastu shastra and calculate loads coming on it as per IS codes.  Introduction- The arrangement of all the units of a building on all floors and at all levels.  The arrangement of rooms as per directions and as per vaastu shastra is known…

Aim- To draw geometries using all the coordinates system methods and by using line tool and circle tool wherever required. Introduction- AutoCAD- AutoCAD is a commercial computer-aided design (CAD) and drafting software application. Developed and marketed by Autodesk. Before the invention of AutoCAD, all designing…

AIM-  To draw cross section of load bearing wall with spread footing. INTRODUCTION-  Load bearing wall is generally used where load coming on structure are less.  All the coming loads are taken by walls and then transfered to the footing, footing transfers it to soil. Load bearing wall is generally provided…

AIM- To draw the given geometry in autoCAD in details. INTRODUCTION- Drawing the given geometry using different commands like line, circle, dimension, text. Line- Start the Line command by clicking the Line button on the Draw panel on the Ribbon, or by entering L and then pressing Enter. Draw line segments by picking several…

CHALLENGE 1 Residence Plan: Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions asreference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missingdimensions. Also, refer the schedule for size of the doors. AIM- To draw a layout of a residence and schedule…

1. Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text. Hint: Use font name: romans.shx; Height: 8”, Justify: Left AIM- To create column schedule as shown. INTRODUCTION- Column schedule means table…

1. Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document it. Also, assume dimensions, wherever needed. Note: All dimensions are in mm.   AIM- To draw the…

1. Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required.         AIM- To draw floor plan and sections…

Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East  c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Beam, Footing Plan)    …

  1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock,…

1. Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. AIM- To draw the detailed kitchen layout as shown in figure. INTRODUCTION- Kitchen layout plan-…

1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the layout.…

  1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. AIM- CREATE THE 3D MODEL OF FURNITURE ELEMENT SHOWN IN THE FIGURE. INTRODUCTION- AutoCAD- AutoCAD stands for Computer-Aided Design.  AutoCAD is software developed by the company Autodesk. It allows you to draw and…

1. Create a 3D Isometric View of the building with plan and elevation given. AIM- TO CREATE THE 3D ISOMETRIC VIEW OF THE BUILDING. INTRODUCTION- Wall- A wall is a structure and a surface that defines an area, carries a load, provides security, shelter, or soundproofing or, is decorative. The purposes…

AIM- To create a 3 Dimensional model of the residential building with a rendered view.   INTRODUCTION- Wall- A wall is a structure and a surface that defines an area, carries a load, provides security, shelter, or soundproofing or, is decorative. The purposes of walls in buildings are to support roofs, floors and ceilings, to…

1) From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately. AIM- To create a new project using structural, architectural and construction templet. INTRODUCTION- REVIT- Autodesk Revit is a BIM software means a Building Information Modelling. Autodesk…

1) What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. AIM- To get information about BIM and benifits of using BIM over 2D CAD tools. RESULT- Building Information Modeling (BIM): BIM is a tool for Building Information Modeling or Building Information Management. It is a process…

1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created from…

1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ? Importance of national building codes while modeling in revit- National building codes are used while drawing because safety of structures is imporatant parameter for public. so to reduce risks to an acceptable level…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level. AIM- To model a ceiling from the architecture tab abaove walls at the first floor level. INTRODUCTION-  REVIT- Autodesk Revit is a BIM software means a…

1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project. AIM- To open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project. INTRODUCTION-  REVIT- Autodesk Revit is a BIM software…