Week-6 Challenge: EV Drivetrain

Create a MATLAB model of an electric car which uses a lithium-ion battery and a suitable motor. Choose suitable blocks from Simscape or Powertrain block set. Implement the vehicle speed control usinthe g PI controller and generate brake and accelerator commands. Avoid using readymade driver block for speed control. Prepare…

1.) MATLAB model of the electric car which uses a battery and a DC motor   system level configuration   Model parameters   Results   Conclusion every parameter and construction and structure is provided in detail this the model of an electric vehicle, which contains the drive cycle and power converter,…

PART-A 1.) LIST OUT THE TOTAL WEIGHT OF VARIOUS TYPES OF AIRCRAFTS: The aircraft gross weight (also known as the all-up weight and abbreviated AUW) is the total aircraft weight at any moment during the flight or ground operation. An aircraft's gross weight will decrease during a flight due to fuel and oil consumption.…

1.) The braking energy formula is as follows :  Benergy=12⋅m⋅(vi2-vf2)">benery=1/2⋅m⋅(v2i−v2f)   Where is the braking energy is Joules (J), m">m is the mass in kg , vi">viis the initial velocity of the vehicle in m/s and vf">vf is the final velocity of the vehicle in m/s.    The UDDS cycle is used for this particular calculation.…

1.) A)  This model shows the simulation of an H-bridge used to generate a chopped voltage and to control the speed of a DC moto ere the power BJT switches act as chopper & by varying the duty cycle of the switches the speed of DC motor is controlled.   Description:  The Bipolar Junction Transistor (BJT)…

  1.A power converter electrical circuit that changes the sectric energy from one term into the desired form optimized for the specime load. A converter may do one or more functions and are an output. A device that increases or decreases this voltage (AC or DC) of a power source depending on appication A converter…

  1. Mapped Model (Static model): The mapped model uses a steady-state lookup table (which is nothing but a set of predefined data sets) to characterize the engine/motor and generator's performance. It is generally used for quasi-steady-state simulations. Mapped Cl engine model using power, air mass flow, fuel flow,…

  #1) ADVISOR, NREL'S Advanced Vehicle Simulator, is a set of model, data, and script text files for use with MATLAB and Simulink. It is designed for rapid analysis of the performance and fuel economy of conventional, electric, and hybrid vehicles. ADVISOR also provides a backbone for the detailed simulation and analysis…

  set the value for mass spring damper system m=3.6; k=400; c=100;    use this parameter mass (m) = 3.6 kg stiffness of spring (k) = 400 N/m damping factor of damper (c) = 100 Ns/m force (f) motion sensor =0 two references used motion sensor unit step scope solver configuration simulink to ps converter ps…

I have completed the project that has been provied