G.S.Mohanbabu - MOHAN
FRESHER
Introduction
12 Projects
Project on Concrete Mix Design for various grades of Concrete
PROJECT ON CONCRETE MIX DESIGN FOR VARIOUS GRADES OF CONCRETE DATA REQUIRED FOR CONCRET MIX DESIGN Grade of concrete Maximum size of aggregate Minimum cement content Maximum w/c ratio Workability in terms of slump Exposure condition Maximum temperature…
02 Sep 2022 04:26 AM IST
Sketch a G+1 residential plan according to Vaastu Shastra and Calculation of Loads as per IS code
SKETCH OF G+1 FLOOR RESIDENTIAL PLAN , TO VAASTU SHASTRA AIM OF THE PROJECT :- To sketch a G+1 floor residential plan according to vastu shastra and list down the names of structural drawing required to be provided to the site for construction. To assume the size of structural elements [column , beam…
14 Sep 2022 06:03 AM IST
Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings
PROJECT-1 AIM :- TO CREATE AN OWN ARCHITECTURAL DRAWING CONSISTING OF FLOOR PLAN ,ELEVATION AND SECTIONS FOR THE PLOT SIZE 60’X20’ (18.3mx6m) AND ALSO CREATE THE STRUCTURAL DRAWINGS FOR COLUMN,FOOTING AND BEAM. EXPLAIN THE PROCEDURE STEP BY STEP AND DISPLAY THE RESULT. INTRODUCTION:- AUTOCAD IS…
09 Nov 2022 02:34 PM IST
Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad
1 ANS: 2 ANS: 3 ANS: 4 ANS: 5 ANS:
09 Nov 2022 02:41 PM IST
Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad
1 ANS : LAYOUT OF KITCHEN FILE ATTACHED BELOW 2 ANS: 3 ANS:
09 Nov 2022 02:46 PM IST
Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad
1 ANS: 2 ANS: 3 ANS:
09 Nov 2022 02:48 PM IST
Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad
1 ANS: 2 ANS: 3 ANS: 4 ANS: 5 ANS:
09 Nov 2022 02:52 PM IST
Creating 3D Isometric view of various structural elements in AutoCAD
1 ANS: 2 ANS: 3 ANS: 3 ANS: 4 ANS:
09 Nov 2022 02:57 PM IST
Project 2_Creating a 3D rendered model for a Residential Building in AutoCad
PROJECT-2 AIM:- To Create The 3D Rendered module of residential building using proper views and rendered views INTRODUCTION:- I created a 3D Rendered module of residential building using AUTOCAD 2023. I am using proper layers and commands while creating the module I am using lot of tools while…
17 Nov 2022 04:10 PM IST
Week 1 Challenge
1.1 To Import a STAAD.Pro (*.std) File Select STAAD Importfrom the backstage. The Import from STAAD.Pro dialog opens. Click [...]in General settings to browse and select a STAAD.Pro (*.std) file to import. Select Use Mapping Filein Section Mapping settings, and then click [...] to…
30 Dec 2022 01:24 PM IST
Week 2 Challenge
1.1 GO TO THE PROPERTIES > DEFINE SECTION > CIRCLE. 1.2 OPENÂ STAA.pro SOFTWARE > CHOOSE UNITS SYSTEM > ENGLISH/METRIC. 1.3 LENGTH HEIGHT WIDTH OF BAYS ALONG THE LENGTH OF BAYS ALONG THE WIDTH OF BAYS ALONG THE HEIGHT 1.4 IS 456:2000 IS 13920:2016 IS 800:2007 1.5 GO TO DESIGN > DEFINE DESIGN PARAMETERS > SPECIFY THE COMPRESSION…
01 Jan 2023 06:54 AM IST
Week 3 Challenge
1.1 DEAD LOAD LIVE LOAD WIND LOAD EARTHQUAKE LOAD 1.2 THE RATIO OF LONGER SPAN AND SHORTER SPAN IS GREATER THAN 2 IS CALLED ONE WAY SLAB WHERE Ly/Lx >2. WHERE LOAD ACTING ON TWO DIRECTION IN A SLAB IS CALLED ONE WAY SLAB. 1.3 UNIT WEIGHT OF STRUCTURAL STELL IS 7840 Kg/m3 UNIT WEIGHT OF SOIL IS 18 KN/m3 1.4 CIRCULAR…
02 Jan 2023 02:44 PM IST
4 Course Certificates
Academic Qualification
Diploma
Indira Institute Of Technology And Sciences
01 Nov 2020 - 02 Mar 2023
10th
APSWR SCHOOL MALUGURU
12 Jun 2014 - 24 Apr 2020
Here are the courses that I have enrolled
Similar Profiles
Ladder of success cannot be climbed with hands in pocket.
The Future in Motion
The future in motion
Passionate to learn